# Cleaning Raw Steel

So long as the rust is not allowed to spread too deep into the steel, raw steel can be restored back to its former glory quite easily.

* Apply WD40 to the rusted legs and allow to sit for around 30 minutes.
* Take a kitchen scour pad (the green fabric type material) and apply more WD40 to pad.
* Work the pad in a circular motion over all parts of the rusted steel. Apply more WD40 if it starts to dry out.
* Wipe the legs with a dry cloth.

{% hint style="info" %}
This is a good first step should you wish to paint your legs. Just remember to degrease to remove any oil prior to applying paint
{% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://support.thehairpinlegcompany.co.uk/colours-and-finishes/self-finishing/cleaning-raw-steel.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.