> For the complete documentation index, see [llms.txt](https://support.thehairpinlegcompany.co.uk/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.thehairpinlegcompany.co.uk/table-legs/choosing-the-perfect-legs/choosing-legs-for-difficult-materials/fixing-legs-to-stone-table-tops.md).

# Fixing Legs to Stone Table Tops

Options for fixing legs to stone tops and other tops that are difficult to screw into.

### Wooden or plywood plinth

For marble, granite, quartz and other stone tops, a plinth is usually the easiest way to give the legs a surface to screw into. The same approach can help with Corian-type solid surfaces and some kitchen worktops, where the material is difficult to drill or the construction won’t hold screws reliably. Not every worktop needs a plinth; it depends on the material and construction.

Fix a strong wooden or plywood board beneath your top, then screw the legs into the board. We recommend 24 mm plywood rather than MDF or particleboard for this fixing surface. The plinth must be securely attached to the top, so check the fixing method and any adhesive with your top supplier or fabricator.

Separate pairs of legs and hairpin legs need the top and its fixings for stability. Check our [table stability guidance](/table-legs/choosing-the-perfect-legs/choosing-legs-for-a-strong-and-stable-build.md) when choosing legs for your build.

### Self-supporting full frame

A full frame that is stable without the top attached is a useful alternative if you don’t want to screw-fix into the top. You can see [our freestanding table frames](https://hairpin.com/products/frame-legs-square) here. Check that the frame suits your top and intended use, and agree a suitable way to secure the top with your supplier or fabricator.

You can find a table-building example here: <https://thediyplaybook.com/diy-hairpin-table-2-ways/>